What is the first thing you need to do when buying a brand new robot mower?

-Upgrade firmware of course!

It actually runs smother around the edges with the new update!

It was easy to download the firmware at https://www.worxlandroid.com/nb-NO/software-update/check all you need is the serial. You can find that under the lid on a small removable sticker. I recommend that you remove the sticker and put it in your garage or so.

One you have downloaded the firmware put it on a FAT 32 USB stick and go out to your robot mower.

Flip it around and unscrew the 4 screws protecting the battery and find the usb here:

landroid usb

Now simply insert your usb stick and flip your robot back over

20170519_194705

Turn it on and firmwareupdate will start automatically.

20170519_194742

It will tell you in some seconds to remove the USB. Just flip the robot back over and remove the USB key and screw the plastic case back over the battery with the 4 screws.

20170519_194647

Now just wait a second and you are done.

Easy.

And I highly recommend doing this as the droid works way better around the edges than before.

20170519_195540

The unit was super cheap at Coop Obs bygg. Only 5990kr all cables and pegs included.

Advertisements